有机元素检测仪器在石油化工行业的需求和应用现状

本文通过对国内外石油及石化产品分析检测相关标准技术的调研与收集,以及相关检测仪器特点的分析,对目前包括润滑油、汽油、柴油、煤油、石蜡、石化聚合物、原油等样品类型,共计80个样品在现有仪器上进行测试,使用标准方法对样品中碳、氢、氮、硫元素进行检测,获取样品的检测时间、含量结果、仪器条件等参数,为相关仪器检测提供数据基础.     

应用型人才培养模式下的材料科学基础实验课程改革

材料科学基础实验是我校高分子材料与工程专业必修的实验课程，是与材料科学基础课程理论知识相配套的应用实践课，本文结合我校应用型人才培养模式，针对目前开设的实验课程中的不足，通过对材料科学基础实验教学方法、实验类型以及考核方式等方面进行改革，提高学生学习兴趣、综合分析问题与实践创新能力，为培养社会发展需要的高质量应用型人才奠定基础。     

锂离子电池石墨负极放热反应研究

采用差示扫描量热仪(DSC)对满嵌锂态石墨负极在50～400℃之间出现的放热反应进行了研究.对不同荷电状态(SOC)的负极进行DSC、扫描电镜(SEM)和X射线衍射(XRD)分析以研究放热反应发生的过程.对负极中各物质之间可能发生的反应也均使用DSC进行分析.最终得出石墨负极各放热反应归属:100～120℃为SEI膜分解.200～270℃为锂与电解液的反应,270～300℃为锂与羧甲基纤维素钠(CMC)的反应以及电解液的分解反应,300℃以上放热尖峰为锂与石墨的反应.     

Nb2O5-doped NiZnCo ferrite ceramics with ultra-high magnetic quality factor and low coercivity for high-frequency electronic devices

This work investigates the influence of niobium pentoxide (Nb₂O₅) as dopant, on the structural, magnetic, and dielectric properties of NiZnCo ferrites. The results showed that Nb₂O₅ was an effective dopant, and the Nb⁵⁺ ions entered the B site to replace Fe³⁺ ions, which altered the electromagnetic properties of the NiZnCo ferrite. In particular, the coercivity (H_c) was 20～24 Oe, and the magnetic quality factor (Q), was more than 200 at x = 0 and x = 0.1 wt%, which is 4～5 times higher than that of NiZn and NiCuZn ferrites. Excellent electromagnetic properties were obtained for 0.1 wt% Nb₂O₅-doped NiZnCo ferrite, i.e., M_s = 88.3 emu/g, H_c =20.4 Oe, ρ = 2.4 × 10⁵ Ω m and Q = 202 @20 MHz. These excellent electromagnetic properties of Nb₂O₅-doped NiZnCo ferrites could be potentially applied to resonators and capacitors at high frequency.     

Comparison between fluctuation of floating potential gradient and velocity of blob structure on HL-2A tokamak

Several results based on the Langmuir probes' data on the HL-2A tokamak are presented. The blob structures' radial and poloidal drift velocities, estimated by the gradient of floating potential and by time delay evaluation, are compared in different line-averaged density and electron cyclotron resonance heating conditions. A positive correlation is observed in the comparison between blobs' radial velocity estimated by the two methods mentioned above, regardless of the situation differences mentioned above. Correlation is also observed in the comparison between the blobs' poloidal velocity estimated by the two methods in different situations, while a shift due to the different line-averaged density is observed. These results imply that the radial gradient of floating potential may have some value as a reference during data analysis in low-parameter discharge.     

Simulations of NBI fast ion loss in the presence of toroidal field ripple on EAST

NBI fast ion losses in the presence of the toroidal field ripple on EAST have been investigated by using the orbit code GYCAVA and the NBI code TGCO. The ripple effect was included in the upgraded version of the GYCAVA code. It is found that loss regions of NBI fast ions are mainly on the low field side near the edge in the presence of ripple. For co-current NBIs, the synergy effect of ripple and Coulomb collision on fast ion losses is dominant, and fast trapped ions located on the low field side are easily lost. The ripple well loss and the ripple stochastic loss of fast ions have been identified from the heat loads of co-current NBI fast ions. The ripple stochastic loss and the collisioninduced loss are much larger than the ripple well loss. Heat loads of lost fast ions are mainly localized on the right side of the radio frequency wave antennas from the inside view toward the first wall. For counter-current NBIs, the first orbit loss due to the magnetic drift is the dominant loss channel. In addition, fast ion loss fraction with ripple and collision for each NBI linearly increases with the effective charge number, which is related to the pitch angle scattering effect.     

基于特征融合的主观题智能阅卷算法研究

为了实现主观题智能阅卷,本文提出了一个基于多特征融合的主观题智能阅卷算法.首先,分别设计两种算法:关键词相似度算法和语义相似度算法,计算学生答案和标准答案之间的关键词相似度和语义相似度;然后,以题目的 题型和科目作为特征值,分别计算出两相似度的权值,并利用权值计算出学生答案的得分实验表明,本文提出的算法,能有效主观题智能阅卷算法的准确性,具有较好的应用前景.     

Preparation of a ternary hybrid of P-g-C3N4@PGS-Ti and its enhancement of the flame retardancy of epoxy resins

A novel ternary hybrid flame retardant named P-g-C₃N₄@PGS-Ti was prepared through step-by-step method. First, titanium dioxide was loaded on PGS to make PGS-Ti (where PGS = palygorskite), and then, PGS-Ti was decorated by phosphor-doped g-C₃N₄ (abbreviated as P-g-C₃N₄) to prepare a ternary flame retardant of P-g-C₃N₄@PGS-Ti. It showed that P-g-C₃N₄@PGS-Ti could efficiently improve the flame retardancy of epoxy resins (EP). The structure and the morphology of P-C₃N₄@PGS-Ti were characterized by Fourier transform infrared spectroscopy, X-ray diffraction, scaanning electron microscopy and hermogravimetric analysis (TGA). The flame retardancy and the burning behavior of 5 wt% P-g-C₃N₄@PGS-Ti composited EP were well investigated through TGA, limiting oxygen index (LOI), cone calorimeter test (CCT) and vertical burning test (UL-94 standard). It was found that the peak heat releasing (pk-HRR) of the EP/P-g-C₃N₄@PGS-Ti composite reduced 36% (from 1459 to 852 kW/m²) with the addition of 5 wt% of P-g-C₃N₄@PGS-Ti flame retardant to the matrix of EP. The combustion residue analysis showed that the EP/P-g-C₃N₄@PGS-Ti composite gained the most continuous and firmest char yield due to the synergistic effect of PGS, TiO₂ and the introducing of P element. The mechanism proved that the combination of gas phase and condensed phase flame-retardant processes were well coordinated to improve the fire retardancy for EP. We tested and studied the mechanical properties of EP/P-g-C₃N₄@PGS-Ti composites. Only 2.4% decreasing of flexural strength and 23.5% decreasing of impact strength in EP/P-g-C₃N₄@PGS-Ti composites compared to pure EP, respectively. But according to the test results of EP/P-g-C₃N₄@PGS-Ti composite material and the control sample in the system, EP/P-g-C₃N₄@PGS-Ti composite material had the highest flexural modulus and impact strength.